I recently evaluated using page compression on some of my production data (see my post on estimating data compression). I’m using transactional replication to send this data out to a few other servers for reporting pusposes and I wanted to adjust replication so that the data compression settings on the tables would also be replicated.

Making life a little easier on this was an application change that was going to require me dropping and recreating replication so I figured it would be a simple case to change the replication options when recreating the publications.

Using the GUI I scripted out all of the existing publications and then dropped them.

Now I wanted to adjust the script so that the schema options I wanted replicated were applied. Here’s the sp_addarticle for one of these tables (SQL 2008)

 — Adding the transactional articles

 use [TestDB]

exec sp_addarticle
    @publication = N’TestDB_TestTable’
    , @article = N’TestTable’
    , @source_owner = N’dbo’
    , @source_object = N’TestTable’
    , @type = N’logbased’
    , @description = N”
    , @creation_script = N”
    , @pre_creation_cmd = N’drop’
    , @schema_option = 0x000000000803509F
    , @identityrangemanagementoption = N’none’
    , @destination_table = N’TestTable’
    , @destination_owner = N’dbo’
    , @status = 24
    , @vertical_partition = N’false’
    , @ins_cmd = N’CALL [dbo].[sp_MSins_dboTestTable]’
    , @del_cmd = N’CALL [dbo].[sp_MSdel_dboTestTable]’
    , @upd_cmd = N’SCALL [dbo].[sp_MSupd_dboTestTable]’
GO

Now this doesn’t tell you a lot about what schema options are in place. The binary value @schema_option has all the information you need however it’s not exactly user friendly. Books Online has the information available to be able to figure this out, it just takes a little calculation. Somewhat of a pain I’ve created a script to tell me what options are enabled.

All you need to do is pass in the @schema_option value and it will tell you what options are enabled (in this case  0x000000000803509F)

/* PROVIDES THE REPLICATION OPTIONS ENABLED FOR A GIVEN @SCHEMA_OPTION IN SYSARTICLES */

declare @schema_option varbinary(8) = 0x000000000803509F  –< PUT YOUR SCHEMA_OPTION HERE

set nocount on
declare @OptionTable table ( HexValue varbinary(8), IntValue as cast(HexValue as bigint), OptionDescription varchar(255))
insert into @OptionTable (HexValue, OptionDescription)
select 0x01 ,‘Generates object creation script’
union all  select 0x02 ,‘Generates procs that propogate changes for the article’
union all  select 0x04 ,‘Identity columns are scripted using the IDENTITY property’
union all  select 0x08 ,‘Replicate timestamp columns (if not set timestamps are replicated as binary)’
union all  select 0x10 ,‘Generates corresponding clustered index’
union all  select 0x20 ,‘Converts UDT to base data types’
union all  select 0x40 ,‘Create corresponding nonclustered indexes’
union all  select 0x80 ,‘Replicate pk constraints’
union all  select 0x100 ,‘Replicates user triggers’
union all  select 0x200 ,‘Replicates foreign key constraints’
union all  select 0x400 ,‘Replicates check constraints’
union all  select 0x800  ,‘Replicates defaults’
union all  select 0x1000 ,‘Replicates column-level collation’
union all  select 0x2000 ,‘Replicates extended properties’
union all  select 0x4000 ,‘Replicates UNIQUE constraints’
union all  select 0x8000 ,‘Not valid’
union all  select 0x10000 ,‘Replicates CHECK constraints as NOT FOR REPLICATION so are not enforced during sync’
union all  select 0x20000 ,‘Replicates FOREIGN KEY constraints as NOT FOR REPLICATION so are not enforced during sync’
union all  select 0x40000 ,‘Replicates filegroups’
union all  select 0x80000 ,‘Replicates partition scheme for partitioned table’
union all  select 0x100000 ,‘Replicates partition scheme for partitioned index’
union all  select 0x200000 ,‘Replicates table statistics’
union all  select 0x400000 ,‘Default bindings’
union all  select 0x800000 ,‘Rule bindings’
union all  select 0x1000000 ,‘Full text index’
union all  select 0x2000000 ,‘XML schema collections bound to xml columns not replicated’
union all  select 0x4000000 ,‘Replicates indexes on xml columns’
union all  select 0x8000000 ,‘Creates schemas not present on subscriber’
union all  select 0x10000000 ,‘Converts xml columns to ntext’
union all  select 0x20000000 ,‘Converts (max) data types to text/image’
union all  select 0x40000000 ,‘Replicates permissions’
union all  select 0x80000000 ,‘Drop dependencies to objects not part of publication’
union all  select 0x100000000 ,‘Replicate FILESTREAM attribute (2008 only)’
union all  select 0x200000000 ,‘Converts date & time data types to earlier versions’
union all  select 0x400000000 ,‘Replicates compression option for data & indexes’
union all  select 0x800000000  ,‘Store FILESTREAM data on its own filegroup at subscriber’
union all  select 0x1000000000 ,‘Converts CLR UDTs larger than 8000 bytes to varbinary(max)’
union all  select 0x2000000000 ,‘Converts hierarchyid to varbinary(max)’
union all  select 0x4000000000 ,‘Replicates filtered indexes’
union all  select 0x8000000000 ,‘Converts geography, geometry to varbinary(max)’
union all  select 0x10000000000 ,‘Replicates geography, geometry indexes’
union all  select 0x20000000000 ,‘Replicates SPARSE attribute ‘
                  
select HexValue,OptionDescription as ‘Schema Options Enabled’
From @OptionTable where (cast(@schema_option as bigint) & cast(HexValue as bigint)) <> 0

This is really great and useful. In fact you can use this script to check out the schema options for any article, just plug in the schem_option value from sysarticles to get the data.

Now to take it a step further I wanted to know what the new value would need to be for @schema_option in order to replicate the data compression settings. For this I wrote another query. This time it’s just a case of uncommenting the lines for the schema options that I want and running the select.

select cast(

  cast(0x01 AS BIGINT) –DEFAULT Generates object creation script
| cast(0x02 AS BIGINT) –DEFAULT Generates procs that propogate changes for the article
| cast(0x04 AS BIGINT) –Identity columns are scripted using the IDENTITY property
| cast(0x08 AS BIGINT) –DEFAULT Replicate timestamp columns (if not set timestamps are replicated as binary)
| cast(0x10 AS BIGINT) –DEFAULT Generates corresponding clustered index
–| cast(0x20 AS BIGINT) –Converts UDT to base data types
–| cast(0x40 AS BIGINT) –Create corresponding nonclustered indexes
| cast(0x80 AS BIGINT) –DEFAULT Replicate pk constraints
–| cast(0x100 AS BIGINT) –Replicates user triggers
–| cast(0x200 AS BIGINT) –Replicates foreign key constraints
–| cast(0x400 AS BIGINT) –Replicates check constraints
–| cast(0x800 AS BIGINT)  –Replicates defaults
| cast(0x1000 AS BIGINT) –DEFAULT Replicates column-level collation
–| cast(0x2000 AS BIGINT) –Replicates extended properties
| cast(0x4000 AS BIGINT) –DEFAULT Replicates UNIQUE constraints
–| cast(0x8000 AS BIGINT) –Not valid
| cast(0x10000 AS BIGINT) –DEFAULT Replicates CHECK constraints as NOT FOR REPLICATION so are not enforced during sync
| cast(0x20000 AS BIGINT) –DEFAULT Replicates FOREIGN KEY constraints as NOT FOR REPLICATION so are not enforced during sync
–| cast(0x40000 AS BIGINT) –Replicates filegroups (filegroups must already exist on subscriber)
–| cast(0x80000 AS BIGINT) –Replicates partition scheme for partitioned table
–| cast(0x100000 AS BIGINT) –Replicates partition scheme for partitioned index
–| cast(0x200000 AS BIGINT) –Replicates table statistics
–| cast(0x400000 AS BIGINT) –Default bindings
–| cast(0x800000 AS BIGINT) –Rule bindings
–| cast(0x1000000 AS BIGINT) –Full text index
–| cast(0x2000000 AS BIGINT) –XML schema collections bound to xml columns not replicated
–| cast(0x4000000 AS BIGINT) –Replicates indexes on xml columns
| cast(0x8000000 AS BIGINT) –DEFAULT Creates schemas not present on subscriber
–| cast(0x10000000 AS BIGINT) –Converts xml columns to ntext
–| cast(0x20000000 AS BIGINT) –Converts (max) data types to text/image
–| cast(0x40000000 AS BIGINT) –Replicates permissions
–| cast(0x80000000 AS BIGINT) –Drop dependencies to objects not part of publication
–| cast(0x100000000 AS BIGINT) –Replicate FILESTREAM attribute (2008 only)
–| cast(0x200000000 AS BIGINT) –Converts date & time data types to earlier versions
| cast(0x400000000 AS BIGINT) –Replicates compression option for data & indexes
–| cast(0x800000000 AS BIGINT)  –Store FILESTREAM data on its own filegroup at subscriber
–| cast(0x1000000000 AS BIGINT) –Converts CLR UDTs larger than 8000 bytes to varbinary(max)
–| cast(0x2000000000 AS BIGINT) –Converts hierarchyid to varbinary(max)
–| cast(0x4000000000 AS BIGINT) –Replicates filtered indexes
–| cast(0x8000000000 AS BIGINT) –Converts geography, geometry to varbinary(max)
–| cast(0x10000000000 AS BIGINT) –Replicates geography, geometry indexes
–| cast(0x20000000000 AS BIGINT) –Replicates SPARSE attribute
AS BINARY(8)) as Schema_Option

Plugging in that new value and executing the sp_addarticle script created the new article with all the old settings and now included replicating compression options.

Download the script Replication Schema Options.sql give them a try yourself and let me know if they help.